IP
UDP
TCP
HTTP
cisco certification 200-125 ccna exam preparation with practice questions and Answers
At Which layer of the OSI Model does packet switching and path selection occurred
Physical Layer
Data Link Layer
Network Layer
Application Layer
Data Link Layer
Network Layer
Application Layer
Which command use to set default gateway in a Cisco switch
ip default-gateway
ip default-network
default-gateway
ip default-network
default-gateway
Which protocol uses tcp port 21
STP (spanning tree protocol)
FTP (File Transfer Protocol)
TFTP (Trivial File Transfer Protocol)
FTP (File Transfer Protocol)
TFTP (Trivial File Transfer Protocol)
Which Command Encrypt all password in plain text in a Cisco router or witch
service password-encryption
service-password encryption
enable secret
enable password
service-password encryption
enable secret
enable password
What are Two Method use by RIP Routing protocol to avoid Routing Loops
Split horizon rule
Maximum Hop Count
Spanning tree protocol
Elect DR and BDR
Maximum Hop Count
Spanning tree protocol
Elect DR and BDR
Which Command Enable debug PPP CHAP Authentication
debug chap authentication
debug ppp chap authentication
debug authentication
debug ppp authentication
debug ppp chap authentication
debug authentication
debug ppp authentication
Select the Valid IPv6 address
2031:1201:100F:0:9C0F:0
2021:0:130F:8F00::7524
2001::090F:AB00::2535
2003:W192:B40F:AF00::G924
2021:0:130F:8F00::7524
2001::090F:AB00::2535
2003:W192:B40F:AF00::G924
Which Protocol is used to Share VLAN Configuration information Between two Cisco Switches?
Spanning Tree Protocol (STP)
Dynamic Trunking Protocol (DTP)
Router Information Protocol (RIP)
Dynamic Trunking Protocol (DTP)
Router Information Protocol (RIP)
Which Routing Protocol use Multicast address 224.0.0.9 to send Routing Updates
RIPv2
EIGRP
OSPF
IS-IS
Which items are correct about the routing protocol OSPF(Choose Three)
OSPF use Hop Count as Metric
it supports VLSM
Area 0 is Called Backbone Area
Process id has to be match in all routers
Which of the Following is a Correct Default Route
ip route 192.168.10.0 0.0.0.0 serial 2/0
ip route 0.0.0.0 172.16.30.2 192.168.20.2
ip route 0.0.0.0 0.0.0.0 fastEthernet 1/0
ip route 10.0.0.0 0.0.0.0 192.168.10.2
ip route 0.0.0.0 172.16.30.2 192.168.20.2
ip route 0.0.0.0 0.0.0.0 fastEthernet 1/0
ip route 10.0.0.0 0.0.0.0 192.168.10.2
Subscribe to:
Posts (Atom)
Popular Posts
-
Refer to the exhibit. What two commands will change the next-hop address for the 10.0.0.0/8 network from 172.16.40.2 to 192.168.1.2? (C...
-
VTY interface console interface Ethernet interface secret EXEC mode privileged EXEC mode router configuration mode
-
Refer to the exhibit. A network administrator has to develop an IP addressing scheme that uses the 192.168.1.0 /24 address space. The n...
-
Distance vector routing protocols, such as RIP, converge more quickly than do link-state routing protocols. EIGRP can be used on all of th...
-
10101100. 00011001.01000011.00000000 10101100. 00011001.01000011.11111111 10101100. 00011001.01000010.00000000 10101100. 00011001.01000010.0...
-
Refer to the exhibit. What characteristic of hierarchical network designs is exhibited by having SW3 connected to both SW1 and Sw2?
-
Refer to the exhibit. All devices shown in the exhibit have factory default settings. How many broadcast domains are represented in the...
-
service provider edge enterprise WAN applications and devices services module
-
source end transfer intermediary
-
It connects multiple IP networks. It controls the flow of data via the use of Layer 2 addresses. It determines the best path to send pac...