Refer to the exhibit. Routers R1 and R2 are directly connected via
their serial interfaces and are both running the EIGRP routing protocol. R1 and
R2 can ping the directly connected serial interface of their neighbor, but they
cannot form an EIGRP neighbor adjacency.
What action should be taken to solve this problem?
Enable the serial interfaces of both routers.
Configure EIGRP to send periodic updates.
Configure the same hello interval between the routers.
Configure both routers with the same EIGRP process ID.
cisco certification 200-125 ccna exam preparation with practice questions and Answers
Popular Posts
-
10101100. 00011001.01000011.00000000 10101100. 00011001.01000011.11111111 10101100. 00011001.01000010.00000000 10101100. 00011001.01000010.0...
-
The router modifies the TTL field, decrementing it by one. The router changes the source IP to the IP of the exit interface. The router ma...
-
Refer to the exhibit. What two commands will change the next-hop address for the 10.0.0.0/8 network from 172.16.40.2 to 192.168.1.2? (C...
-
source end transfer intermediary
-
Refer to the exhibit. All devices shown in the exhibit have factory default settings. How many broadcast domains are represented in the...
-
Application Layer Data Link Layer Network Layer Transport Layer
-
255.255.0.0 255.255.255.0 255.255.254.0 255.255.248.0
-
the MAC address of the interface of the router the destination Layer 4 port number the destination host address the next-hop address
-
Refer to the exhibit. A network administrator has to develop an IP addressing scheme that uses the 192.168.1.0 /24 address space. The n...
-
Refer to the exhibit. Host_A is attempting to contact Server_B. Which statements correctly describe the addressing Host_A will generate ...